Polarity A 40G Configuration Fiber Optical Pinned MPO-MPO Multimode Aqua Trunk PVC Cable

Polarity A 40G Configuration Fiber Optical Pinned MPO-MPO Multimode Aqua Trunk PVC Cable

● Description: MTP® Trunk multicore cable assemblies facilitate rapid deployment of high density backbone cabling in data center and other high...

Chat Now

Product Details

● Description:
MTP®  brand cable assemblies are multi-fiber patch cords suitable for high density back plane and PCB solutions. MTP brand patch cords offer up to 12 times the density of traditional patch cords, providing significant space and cost savings.


● Application:
① Data Center Infrastructures;MPO-MPO Multimode Aqua Trunk PVC Cable


● Benefits & Features:
① OM3 Corning fiber grades ( OS1/2 and OM4 available);
② 12, 24 and 48 core microcable trunk;
③ LSZH, OFNP cable jacket;
④ Female (standard) and Male MTP® connectors;
⑤ Polarity A (standard), B or C;
⑥ Factory terminated and tested;
⑦ Low insertion losses;


● General Connector Specification:

MPO-MPO Multimode Aqua Trunk PVC Cable-1

MPO-MPO Multimode Aqua Trunk PVC Cable-2


● The basic division of MTP® connectors:

 

Type and Color
 Code Connectors

Insertion
Loss (IL)

Optical
 Return Loss (RL)

Operating
 Temperature

Single-mode MTP® Elite® Connector

0.10 dB Typical (All Fibers) 0.35 dB Maximum (Single Fiber)1

> 60 dB (8°Angle Polished)2

-40℃ to 75℃

Single-mode MTP® Standard Connector

0.25 dB Typical (All Fibers) 0.75 dB Maximum (Single Fiber)1

> 60 dB (8°Angle Polished)2

-40℃ to 75℃

Multimode MTP® Standard Connector

0.25 dB Typical (All Fibers) 0.75 dB Maximum (Single Fiber)1,3

> 20 dB (0°Flat Polished)2,3

-40℃ to 75℃

1 IL test according to IEC 61300-3-4;
2 RL test according to IEC 61300-3-6;
3 Tested with proposed encircled flux launch condition on 50μm fiber & 850nm per IEC 61280-4-1.


 

● Fiber Parameter:

 

Items

Unit

Specification

Cladding Non-Circularity

%

≤2.0

Coating Diameter

μm

245±10

Cladding-Coating Concentricity Error

μm

≤1.0

Core Diameter

μm

62.5±2.5

Cladding Diameter

μm

125±1.0


 

● Individually With Pulling Eyes Packed:

MPO-MPO Multimode Aqua Trunk PVC Cable-3          MPO-MPO Multimode Aqua Trunk PVC Cable-4


● Typical applications and wire map:

MPO-MPO Multimode Aqua Trunk PVC Cable-5

● High Density MTP®/MPO Cabling System In Dada Center:
 

image014(001).jpg

MPO-MPO Multimode Aqua Trunk PVC Cable-5

MPO-MPO Multimode Aqua Trunk PVC Cable-6


There are several configurations for MTP brand cable assemblies. The most popular is a MTP brand connector to MTP brand connector patch or trunk cable that connects an MTP brand cassette to another MTP brand cassette. Or, if you have an MTP brand adapter panel installed in a patch panel, then you can use a MTP brand cable to MTP brand cable in that case, as well.


Another configuration is MTP brand connectors to LC. You have one MTP brand connector on one end and you have a breakout (usually 3 feet) of 12 LC connectors on the other side. You can use these for a few different applications for both back end and front end. In a MTP brand adapter panel, for instance, you can plug in one MTP brand connector in to the back and plug a MTP brand cable to a LC cable in the front and have the 12 LC connections go to your equipment. Or, let's say you have an MTP brand cassette that you want to be lit up by using a 12-fiber LC adapter panel. Plug in each of the 12 LC connections in the LC adapter panel and then have the MTP brand side plug into the back of the cassette. There are other applications, as well, depending on how your network is set up. Increase your transfer speed with 10 Gig 50 Micron multimode cable or increase the distance your signal can travel using singlemode. Cables may be constructed of ribbon fiber, small form factor loose tube assembly cable, or subgrouped trunking cable. Your options are only limited by your application.


To reiterate, the MTP brand cable assemblies can be both Multimode and Singlemode, and there are also keyed secure options. Contact us today if you're unsure of what you need and we'll be happy to assist you.

MTP brand connectors to LC



 

Previous:12 Strands MTP MPO Fiber Breakout Cable Singlemode Yellow Fiber Ribbon Cable Next:Multifiber 9/125µm Singlemode APC MPO MTP Fiber Trunk Cable Connection Assemblies

Inquiry