The MPO harness cable assemblies, using the high density cable and MPO / MTP connector, utilizing fanout kit to assemble from trunk cable to generic fiber optic connectors such as LC, SC, FC, ST, MTRJ, etc. Available in 8/12/24/48 fibers versions as well as multi-mode (62.5/125, 10G OM2 / OM3 / OM4, Bend-insensitive fiber, etc.) and single-mode (G652D, G657A1 etc.) fiber types.
APPLICATION
Data communication network
Optical System Access network
Storage area networking fiber channel
High density architectures
FEATURES
Economical solution for mass-termination of fiber
Designed for low loss and standard loss SM and MM applications
Ruggedized round cable, oval cable and bare ribbon options available
Color coded housings available to differentiate fiber type, polish type and/or connector grade
Good in repeatability and exchangeability
Benefits
Factory terminated & tested with guaranteed quality.
High density to dramatically save space.
Optimize network performance.
The best solution covers all fiber optic cabling needs in all areas of Data Center.
Performance
MPO / MTP Termination:
| Type | Singlemode (APC Polish) | Singlemode (PC Polish) | Multimode (PC Polish) | |||
| Fiber Count | 8, 12, 24, etc. | 8, 12, 24, etc. | 8, 12, 24, etc. | |||
| Fiber Type | G652D, G657A1 etc. | G652D, G657A1 etc. | 62.5/125,OM2,OM3,OM4, etc. | |||
| Maximum Inertion Loss | Elite | Standard | Elite | Standard | Elite | Standard |
| Low Loss | Low Loss | Low Loss | ||||
| ≤0.35 dB | ≤0.75 dB | ≤0.35 dB | ≤0.75 dB | ≤0.35 dB | ≤0.60dB | |
| Return Loss | ≥55 dB | ≥45 dB | ≥20 dB | |||
| Durability | ≥200 times | ≥200 times | ≥200 times | |||
| Test Wavelength | 1310nm / 1550nm | 1310nm / 1550nm | 850nm / 1300nm | |||
Generic Connector Termination:
| Type | Singlemode (APC Polish) | Singlemode (PC Polish) | Multimode (PC Polish) | |||
| Fiber Type | G652D, G657A1 etc. | G652D, G657A1 etc. | 62.5/125,OM2,OM3,OM4, etc. | |||
| Maximum Inertion Loss | Low Loss | Standard | Low Loss | Standard | Low Loss | Standard |
| ≤0.1 dB | ≤0.30 dB | ≤0.1 dB | ≤0.30 dB | ≤0.1 dB | ≤0.30dB | |
| Return Loss | ≥60 dB | ≥50 dB | ≥25 dB | |||
| Durability | ≥500 times | ≥500 times | ≥500 times | |||
| Test Wavelength | 1310nm / 1550nm | 1310nm / 1550nm | 850nm / 1300nm | |||
MPO Gender
MPOs are classified by the guide pins on the end of the connector, and require 1 male and 1 female to mate properly. MPO connectors use a “barrel sleeve” adapter that simply holds one male and one female MPO “plug” together. The male guide pins fit into the female holes to ensure precise fiber alignment. Attempting to mate two female connectors will result in a seemingly secure connection, but with extremely high loss, and attempting to mate two male connectors will most likely damage one or both connectors due to the guide pins clashing.
Transceivers and cassettes come with the sleeve adapter built in, and the industry standard is a male conection on the inside. Therefore, the standard for cables is female to female. This changes, however, when you need to extend a cable or connect two cables. You will then need a male to female cable plus adapter. If you’re designing a multi-ferrule MPO trunk backbone cable, you might consider making this male to male, then patching to your hardware with female to female cables. We offer all combinations of genders, so contact us with your needs and we will be able to customize these for you.
Our products are the ultimate solution for your networking needs. For businesses looking for high-quality, reliable fiber optic cable for their datacom networks, optical systems, access networks, storage area networks, fiber channel and high-density architectures, MPO Fiber Optic Cables are the perfect solution. Our MPO cables are designed and manufactured by top engineers ensuring their quality and durability. We terminate at the factory and each cable is tested to provide superior performance. It is terminated on both ends with MPO connectors, which are compact and enable high-density fiber optic cable solutions. This feature saves space and makes installation a breeze. These connectors are also high-performance, supporting bandwidths up to 100Gbps.
The best solution to improve network efficiency and optimize network performance. They provide faster data transfer and greater network reliability, reducing downtime and increasing productivity. Our MPO cables come in a variety of lengths, making it easier for businesses to install them in data centers without running into cable management and installation difficulties. They are designed to provide optimal network performance by meeting all fiber optic cabling requirements. From the smallest LAN to the largest data center, our MPO cables can handle all types of network traffic.
If you want to enhance network performance, data transfer and network reliability, choose us. They are factory terminated and tested for superior performance, and their compact design allows for space-saving, high-density cabling solutions. Their applications include data communications networks, optical systems, access networks, storage area networks, fiber channels and high-density architectures.
Hot Tags: 12 fiber mpo female to lc upc multimode mode harness cable lszh, China, factory, suppliers, manufacturers, quotation, customized, price, buy