GYXTC8Y/GYXTC8S Outdoor Areial Fiber Optic Cable

GYXTC8Y/GYXTC8S outdoor areial fiber optic cable

The fibers,  250μm , are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire locates in the center of core as a metallic strength member. The tubes (and fillers) are stranded around the strength member into a compact and circular cable core. After an Aluminum Polyethylene Laminate (APL) moisture barrier is applied around the cable core, this part of cable accompanied with the stranded wires as the supporting part are completed with a polyethylene (PE) sheath to be figure 8 structure.

       FOCC reserves the right to revise the specificantions in the cable.

Class A Core Fiber:

 

       *Wonderful Flexiblity 

     **Speedy and Stable

    ***Long transmission Distance

Non-metallic strength  member FRP:

 

       *Anti-corrosion ,high-level strength

      **Central strength member enhances

 the compressive property of cable and

protects fiber

     Outer sheath :

          *All-new PE materials 

         **Smooth surface 

        ***Anti-corrosion 

       ****Environmental Friendly

   

Sufficient Quantity:

 

 *Sufficient quantity is our promise .
**Meter measurement is printed clearly very roll.

Fiber coloure Identification of loose tube with FOCC

the fibers in cables can be identified by standard colour identification in compliance with YD/T901-2001 Standard.

Standard colour Identification

Note: A. when the fiber count of one loose tube is less than 12, the fibers are identified form the NO.1 colour on a stream.

         B.in standard colour identification, the NO.6 white colour could be replaced by nature colour,which called standard colour identification W.

The coloure Identification of loose tubes in cable

the loose rubes in cable  can be identified by pan-chromatograph

Pilot chromatograph

Pan-chromatograph