Features
● Designed original, the machine is ergonomic, suitable for automatic stripping 2~4 core ribbon fiber.
● The upper and lower heating method is used to make the epidermis easier to separate from the peeling fiber coating.
● Use self-sensing method to blow waste.
Introduction
First of all, thank you very much for using our equipment. Be sure to read this instruction before using this machine. This machine belongs to electrical products, should abide by safety matters, and pay enough attention to safety, the correct use of this machine. Wrong operation and use will cause accidents or shorten the life of the equipment, so we should pay attention to it and keep this manual properly after reading. The warranty period of this machine is one year (from the date of delivery), the machine caused by quality reasons can not work normally or abnormal situation within one year, please contact our after-sales service center. (Note - Tools are not covered by this warranty) The following are not covered by warranty:
● Damage caused by improper user use;
● Damage caused by self-removal;
● The use of power supply voltage does not meet the requirements;
● Force majeure causes damage.
Main parameters
|
Carton Length and width
|
Net
|
Gross Weight
|
Power supply
|
Rated power
|
Pressure
|
Output
|
|
355*335*200
|
4.5KG
|
5KG
|
AC220V
|
420W
|
0.1~0.2 Mpa
|
pcs/H>600
|
Notes
● The suitable air pressure is between 0.1~0.2 Mpa;
● AC220V input voltage
● During the operation. If the machine is abnormal, turn off the power supply first, and ask the mechanic to repair or debug in time;
● Non-designated personnel, strictly prohibited to debug or disassemble parts, two people are strictly prohibited to operate the machine at the
same time, lest occur outside;
● Please turn off the thermostat power during tool replacement or debugging!
● In the operation, the machine power supply, the gas source is not disconnected, forbids the finger or any part of the body to enter the fixture or the cutting tool, avoids the industrial injury accident;
● In the operation, if you need to leave the job, you must turn off the power before leaving.
Hot Tags: semi-automatic thermal fiber stripping machine, China, factory, suppliers, manufacturers, quotation, customized, price, buy