LC/UPC to LC/UPC Duplex Singlemode
SC Type Plastic Fiber Optic Adapter
Description
L-com's simplex plastic LC to SC Singlemode hybrid adapter is designed for mounting in panels with rectangular cut outs. This series features a ceramic alignment sleeve which provides precision alignment ensuring signal integrity. Additionally, these adapters can be used with PC or UPC style fiber connectors. Contact us today for large project volume discounts.
Features
- Ceramic sleeve ensures precise Single mode fiber alignment
- Dust caps protect against debris and contamination
- Plastic body provides a light weight yet durable solution
Used to connect simplex LC to simplex SC Single mode fiber cablesOrder online today!
Application
- FTTX
- High EMI/RFI environments
- LAN
- Security
LC/UPC Singlemode Duplex Fiber Optic Adapter, 0.2dB insertion loss
Fiber Optic Adapters are an important component in a fiber optic network; they are used in a fiber optic
patch panel or any other outlet to mate two connectors. Fiber Optic adaptors are available for all standard
connector types in both single mode and multimode including Simplex and duplex versions. Our fiber optic
adapters are made with high precision machines which ensure precise alignment for the connectors when
they are plugged in. fiber Optic Adaptors are color coded allowing easy identification of the adaptor type.
LC fiber optic adaptors are all ceramic sleeve; there are simplex LC adaptors and duplex LC adaptors, usually
duplex LC fiber adaptors are with SC footprint. The LC fiber adaptors colors are same as SC fiber optic adaptors:
blue for single mode PC, beige for multi mode PC and green for single mode APC.
Technical specification
Connector Type | LC-LC | Polish Type | UPC |
Fiber Counts | Duplex | Fiber Mode | Singlemode |
Insertion Loss | ≤0.2dB | Durability | ≤0.1dB |
Flammability Rate | UL94-V0 | Working Temperature | -25~70°C |
Product Highlights
v Low insertion loss and good durability
v Good repeatability and changeability
v Excellent temperature stability
Environmental & Mechanical Data
| Operating Temperature | -40 to +75º C |
| Storage Temperature: | -40 to +85º C |
| Temperature Cycling (61300-2-18) | -40 to +75º C, 40 cycles=0.2dB change |
| High temperature (61300-2-18) | 70˚c for 96Hrs, <0.4dB change |
| Damp Heat (61300-2-19) | 40º C at 93%RH for 96 Hrs, <0.4dB change |
| Vibration-Mated Pair (61300-2-1) | 10-55Hz, 1.5mm P to P <0.2dB change |
| Mating Durability (61300-2-2) | 500 Mating Cycles, clean every 25, <0.2dB change |
Design & Materials
| Adaptor material | High Impart flame retardant thermoplastic UL94-V0 |
| Split Sleeve Material | ceramic |
| Capillary diameter tolerance (Single Mode) | 126 ± 0.5μm |
| Capillary diameter tolerance (Multimode) | 127± 0.5μm |
| Operating Temperature | -40 to +85º C |
| Storage Temperature: | -40 to +85º C |
| Mating durability | >500 Mating Cycles |
LC/UPC To LC/UPC Fiber Optic Adapter Singlemode Duplex SC-Type
Fiber Optic Adapters / Couplers LC/UPC To LC/UPC Fiber Optic Adapter Singlemode Duplex SC-Type
Fiber optic adapters (also called couplers) are designed to connect two fiber optic cables together. They come in versions to connect single fibers together (simplex), two fibers together (duplex), or sometimes four fibers together (quad).
Adapters are designed for multimode or singlemode cables. The singlemode adapters offer more precise alignment of the tips of the connectors (ferrules). It is ok to use singlemode adapters to connect multimode cables, but you should not use multimode adapters to connect singlemode cables. This can cause misalignment of the small singlemode fibers and loss of signal strength (attenuation).
When connecting two multimode fibers, you should always make sure they are the same core diameter (50/125 or 62.5/125). A mismatch here will cause attenuation in one direction (where the larger fiber is transmitting light into the smaller fiber).
Fiber optic adapters are typically connecting cables with similiar connectors (SC to SC, LC to LC, etc.). Some adapters, called “hybrid”, accept different types of connectors (ST to SC, LC to SC, etc.). When the connectors have differing ferrule sizes (1.25mm to 2.5mm), as found in LC to SC adapters, the adapters are significantly more expensive because of a more complicated design/manufacturing process.
Most adapters are female on both ends, to connect two cables. Some are male-female, which typically plug into a port on a piece of equipment. This then allows the port to accept a different connector than for which it was originally designed. We discourage this use because we find the adapter extending from the equipment is subject to being bumped and breaking. Also, if not properly routed, the weight of the cable and connector hanging from the adapter may cause some misalignment and a degraded signal.
Item No. | Description |
1 | Compatible 10GBASE-LR SFP+ 1310nm 10km DOM Transceiver |
2 | LC UPC to LC UPC Duplex 2.0mm PVC(OFNR) Single Mode Fiber Patch Cable |
3 | 1RU Rack Mount HD Fiber Enclosure unloaded |
4 | Fiber Adapter Panel with 12 LC Duplex Singlemode Adapters |
5 | LC/UPC to LC/UPC Duplex Singlemode SC Type Plastic Fiber Optic Adapter |
6 | Fiber Optic Cassette Cleaner for LC/SC/FC/ST/MU/D4/DIN Connector |
7 | Generic Compatible 10GBASE-LR SFP+ 1310nm 10km DOM Transceiver |
8 | High Performance Data Center Switch |
Adapters Bridge the Gap Between Fiber Optic Connectors
Optical fiber adapter plays an increasingly important role in optical fiber connection. It is an inconspicuous and critical connection component. It has strong practicability and high cost performance. It is widely used, especially for television networks, local area networks, video transmission, and optical fiber. Communication systems and FTTH fiber access applications
Frequently asked questions
1.What is your MOQ?
Normally is 1pcs/item,could be coordinated if you have detail requirements.
2.How about your delivery date?
Delivery date is about 3-5days, it depends on the order quantity.
3.Can you supply sample for customers?
of course, however the delivery cost will be charged on customer's account
4.How about your price?
We are supplying products with very competitive price based on good performance.
5.Do you offer OEM Service ?
We accept OEM, ODM. The cable size and material are customized. Our own logo and own design are welcome. We will produce according to your requirment and description;
Hot Tags: lc duplex singlemode sc type adapter, China, factory, suppliers, manufacturers, quotation, customized, price, buy