High Quality and Cost-Effective 9/125μm Single Mode Bend Insensitive Fiber Optic Cable
These high speed single-mode 9/125µm duplex fiber optic patch cables are terminated with SC/APC fiber optic connectors on both ends (SC/APC-SC/APC). Referred to as Subscriber Connectors, Square Connectors or Standard Connectors, these push-pull connectors are the most common choice for FTTH (fiber to the home) applications in use for Datacom and Telcom; most GBIC modules also require this connector type.
Polish Type Abbreviations:
Note: The polish type affects the amount of back reflection, also known as reflectance.
PC - Physical Contact. Polished to create a slight dome at the end of the ferrule that helps to maximize the signal being transmitted.
UPC - Ultra Physical Contact. More extensive polishing than the PC type, a greater dome shape is created that further help to maximize the signal being transmitted.
APC - Angled Physical Contact. Polished at an angle rather than a dome shape. This is the most efficient polish type.
- typical insertion loss: 0.2 dB
- return loss > 65 dB
- fiber jacket 1.8mm, yellow color, zipcord style
- operating temperature: -40 to +75 Celsius degrees
- each cable assembly is manually tested and verified
- each cable assembly is individually sealed and labeled
- label mentions measured loss on patch cord
Industry Standard Fiber Optic Cable
The fiber optic cable has industry standard flammability rating PVC jacket and duplex fiber connector which meets EIA/TIA 604-2 for high speed cabling networks.
G. 657. A1 Bend Insensitive Fiber-BIF Cable can be stapled and bent around corners without sacrificing performance.
10mm Minimum Bend Radius-The bend performance improves duct utilization, enabling smaller enclosures.
Zirconia Ceramic Ferrule-Optimum IL and RL ensure stable signal transmission, protecting your network safety.
· Active device termination
· Telecommunication networks
· Local Area Networks (LANs)
· Data processing networks
· Test equipment
· Precise installations
· Wide Area Networks (WANs)
Our extensive range of fiber patch cables are terminated with state-of-the-art connectors, which are available in any combination of ST, SC, FC, and LC with PC, UPC or APC polish types to meet your standard or custom configurations. Our fiber jumpers have been geometrically inspected with interferometers and tested with automated insertion loss and reflection test equipment to ensure exceptional performance.
To help complete your fiber optic network installation, we offer end-to-end solutions with our wide range of products that include fiber optic enclosures, fiber channel testers, splice trays and other fiber optic accessories.