OM5 Fiber Jumper Cable SC-SC OM5 Fiber Optic Patch Cord
![]() OM5 Fiber Jumper Cable SC-SC OM5 Fiber Optic Patch Cord enable optimal support of emerging Shortwave Wavelength Division Multiplexing (SWDM) applications that reduce parallel fiber count by at least a factor of four to allow continued use of just two fibers (rather than eight) for transmitting 40 Gb/s(up to 400m) and 100 Gb/s(up to 150m) and reduced fiber counts for higher speeds. |
Connector Type | LC/SC | Polish Type | UPC to UPC |
Fiber Mode | OM5 50/125μm | Wavelength | 850/1300nm |
40G Ethernet Distance | 440m at 850nm | 100G Ethernet Distance | 150m at 850nm |
Insertion Loss | ≤0.3dB | Return Loss | ≥20dB |
Fiber Grade | Bend Insensitive | Minimum Bend Radius | 7.5mm |
Attenuation at 850nm | 3.0 dB/km | Attenuation at 1300nm | 1.0 dB/km |
Effective Modal Bandwidth (at 850nm) | ≥4700 MHz·km | Effective Modal Bandwidth (at 953nm) | ≥2470 MHz·km |
Fiber Count | Duplex | Cable Diameter | 2.0mm |
Cable Jacket | PVC | Polarity | A(Tx) to B(Rx) |
Operating Temperature | -20~80°C | Storage Temperature | -40~80°C |
OM5 Multimode Fiber - Ready for Next-Generation Wideband Networks
As data rates increase in the data center, OM5 wideband multimode fiber (WBMMF) will allow use of Short Wavelength Division Multiplexing (SWDM) technology to transmit multiple signals (wavelengths) on one fiber, increasing the bandwidth of a single fiber by a factor of at least four.
Feature
1.Meets RoHS compliant, and all cables are 100% optically tested for end face and insertion loss
to ensure high quality.
2.Zirconia Ceramic Ferrule Optimum IL and RL.
3.Low insertion loss and high return loss, stable transmission.
4.Max bending radius due to the excellent elasticity matallic tube.
5.Stainless steel armor against external factors including rodents.
6.Strong tensile strength, prolong the service life.
Mechanical Drawing:
Application:
FTTH
LAN and Wan
CATV network,optical fiber data network
Active optical devices
Packing & Labeling
Eco-Friendly Packaging & Labeling
This easy to take and well-protected fiber optical cable package has been labeled and marked by FOCC as default. Customized label or package solution are available on request.