We provide wide degree flexibility on fiber pigtails, including single-mode, multi-mode and 10G
50/125um OM3 types, simplex fiber, 4 fibers, 6 fibers, 8 fibers, 12 fibers, 24 fibers, 48 fibers and so on. These fiber pigtails can be with fan-out kits and full compliant to Telcordia, EIA/TIA and IEC standards.
use of pigtails
1. the pigtail avoids the loop as much as possible during use, which can reduce the attenuation of the optical signal during transmission.
2. the optical module connected to the pigtail must be matched with the pigtail fiber. the shortwave optical module must be connected to the multimode pigtail. the longwave optical module must be connected to the singlemode jumper to ensure the accuracy of data transmission.
3. the pigtail connector should be kept clean. after use, the connector should be protected and sealed with a protective sleeve to prevent oil, dust and mechanical damage.
4 before use, the tail fiber ceramic ferrule and the ferrule end face cotton must be wiped clean with alcohol.
5. when there is damage to the pigtail caused by man-made or other factors, replace the damaged jumper in time.